Concrete Seamless Stamp Mat - Fractured Thin Slate (Contractor Pack (3x36 1x18))

THIS IS A PATTERN STAMP- Which means you press it onto something (like concrete) and get a reverse pattern. What you see on the stamp, is the pattern you will see on your finished surface IF YOU DO IT RIGHT. If you don't d it right, you won't get that look. Too wet of concrete, won't work well. Too dry of concrete, won't work well. You also need to use a release so the stamp doesn't stick- release is made for concrete. DO NOT USE DIESEL FUEL! Concrete Stamp Pattern: Seamless Fractured Rock Roman Slate. This stamp pattern comes in sizes of approximately 36" x 36", and touch-up skins 18" x 18". Made of polyurethane composites- Very durable, good for hundreds of uses. Stamping concrete with seamless stamps eliminates the difficult and time consuming process of making sure each stamp is lined up perfectly before pressing in the concrete. It is a very simple and quick process to turn concrete into beautiful stone. Use stamps with Integral Concrete Color and colored Release Agents to create beautiful two dimensional concrete. A powder or liquid release for concrete should be used with these stamps to prevent sticking to the concrete. Clean stamps after each use with water and a stiff brush. Keep stamps stored flat, and out of direct sunlight to prolong their life. How to stamp concrete? After applying a powder or liquid release agent to concrete, lay stamp on concrete surface and press into the concrete. Walking on the stamp, or (depending on concrete hardness) an Tamper Tool may be needed to help push the stamp into the concrete. When picking up the stamp, grab the edges on both sides and pick straight up. Make sure to not drag the stamp across the concrete surface. Turn the stamp at different angles each time you place it down so the pattern is unique. Use multiple stamps to be able to walk out onto the concrete- standing on one while you pick up and re-position the other. Try not to press the edges of the stamp into the concrete. If you do, it will leave a mark