Dual Hose Portable Air Conditioner Window Vent Kit 26-62"Adjustable with 2 Universal 5.0/5.9"Coupler Security Lock 2 Weather Strippings Fit LG Portable AC Vertical/Horizontal Sliding Window Seal Kit

Designed for Specific Dual Hose Portable Air Conditioners

gulrear window vent kit Includes For Single hose and Dual hose Portable Air Conditioners，now this product is designed Compatible with a Dual Hose Portable Air Conditioner Vent Hose with 5.9” Diameter

Great for Vertical and Horizontal Sliding Windows

gulrear plastic window seal can be shortened or lengthened for the desired fit and works with both vertical and horizontal sash windows.

Maximum adjustment length 55 inch

gulrear Portable Ac window vent kit Consists Of 3 Plates, Total 150cm/59Inch Length, Max Adjustable Length 140cm/55Inch,You Don't Need to Use All 3 Plates if it's Not Necessary.

Installation couldn't be easier

gulrear plastic extension kit for portable A/C comes with 2 outer plates and 1 inner plate, and you connect them by using the provided butterfly screws.

STEP 1: INSTALL EXHAUST

1 .Locate the plastic hose and hose connector (NOTE:plastic hose and hose connector are

not included in this kit,because every brand has different types hose connector. they are included with your air conditioner unit).

2 .Expand each end of the exhaust and intake hoses about 6”.Install the hose connectors onto the exhaust and intake hoses by turning counterclockwise.

3 .Align the tab cut-outs of each of the hose connectors to the tabs on the air exhaust and air intake at the rear of the unit and snap in place.

STEP 2:INSTALL WINDOW PANELS

1 .Remove parts from box.（parts 1 -parts 6 ）

2 .Insert window panel to each end of the inter panel,Adjust to fix the length of window，Tighten screw to hold part and together in place.

3 .Open the window and place window panels into window ,Adjust the extension panels to fit width

or height of window by the screw and nut sets mounted on the main panel.

STEP 3 - ATTACH EXHAUST HOSE TO THE EXHAUST NOZZLE

1 .Insert the other end of the exhaust hose assembly onto the window bracket.

2 .Repeat Steps 2-4 for the installation of the second hose assembly

3 .Expand hose as needed and place assembled window kit into sliding window opening

STEP 4 COMPLETE INSTALLATION

1.Cut the Foam Seal to the window length. Stuff the Foam Seal between the inner window sash and the outer window glass to prevent air and insects from getting into room.

2.there are still thin gaps because the inner plates are slightly narrower than the outer plates. we have a roll of air sealing tape that is 3/8” wide.If necessary please bought a slightly wider foam air seal tape from the local hardware