GPS Tracker, Car Kill Switch Anti Theft, GSM SMS GPRS GPS Tracker for Motorcycle Motorbike Vehicle, Cut Off The Oil and Power System Remotely, Locator Tracking Device - Subscription norequired

Main Functions:

1. Cut off the Oil and Power System:

• "Execute immediately mode": Send the command "quickstop+password" to the tracker, and it will respond with "quickstop OK." The tracker will stop the car immediately after the "stop" command is issued.
• "Execute depends on speed mode" (Default mode): Send the command "noquickstop+password" to the tracker, and it will reply with "noquickstop OK." In this mode, the tracker won't stop the car immediately after the "stop" command is given. Instead, it will respond with "it will be execute d after speed less than 20KM/H" and stop the car when the speed is less than 20KM/H.

2. Single Locating:

• If any authorized numbers are set up, the tracker will reply to all calls with location reports. Only authorized numbers can receive location reports from the tracker.
• When the tracker is dialed from an authorized number, it will hang up the call and respond with an SMS containing a Google Maps link and real-time latitude and longitude.
• In case of lost GPS signal, the tracker will use LBS/CELL-ID for tracking. The replied SMS will include two positions:GPS coordinates of the last known position. LAC code. To locate using LBS technology, visit www.gpstrackerxy. com, find "manual track," and input the received code in the LAC and Cell-ID fields.

3. Auto track continuously:

• To track with limited times upon a time interval, send the SMS command "fix030s005n +password" to the tracker device. It will report the position information every 30 seconds for a total of 5 times.
• To track with unlimited times upon a time interval, send the SMS "fix030s030m***n+password" to the tracker. The tracker will report a real-time location every 30 seconds when the vehicle's ACC is ON, and every 30 minutes when the ACC is OFF. Note that the interval must not be less than 10 seconds.
• Smart track upon time and distance interval means that the device can be tracked based on two preset factors: time and distance.

4. Turning points update automatically:

• In GPRS mode, the tracker automatically updates the position information to the web server when the vehicle changes driving direction beyond a pre-set angle value. This ensures a smooth and accurate trajectory representation on the actual road.

5. “Track” and “Monitor” modes switch:

• The default mode is “track” (Track mode), if you want to monitor the voice around the device please send "monitor+password" to tracker to switch it to monitor mode, then you make call to the SIM number in the tracker you will can monitor the voice around it; you can send "tracker+password" to swtich the device back to track mode.

6. GPS drift suppression:

• The "suppress" function is deactivated by default. To activate it, send "suppress+password" to the tracker, and it will reply "suppress drift ok." When the vehicle is not driving (ACC is OFF), the GPS data remains constant. The GPS data updates automatically when the vehicle is in motion (ACC is ON).

7. Exact street address:

• You must set up the APN of your local GSM network for the SIM card in tracker first before using this function; After configured the APN, send "address+password" to device, it will reply SMS including exact street address. For example: No.8, Guankou 2nd Rd, Nantou, Nanshan district, Shenzhen, Guangdong, china.

8. Location based service (LBS) / Cell-ID Locating:

• If the tracker cannot establish a solid GPS Fix, it will calculate its location using Cell-ID GSM locating. Location reports will include the GPS coordinates of the last known positions as well as a LAC code, Entering the LAC code to the “Manual Track” menu of web tracking platform www.gpstrackerxy. com will enable you to see the tracker’s current location. You can also send command “address+password” to the tracker to request exact address, track will automatically switch to tracking by LBS in GPRS mode. Accuracy of LBS depends on the distance to the nearest GSM Network Cell Tower or Base Station.
• Note: This feature can be used normally in most areas according to the signal of GSM network. It may not be available in some areas.

9. Data Load:

• *Current date Load: send SMS: “load+ password” to tracker device, it will reply: “load ok” if the device is working well under GPRS mode; if not, it will reply “load fail! Please check gprs” that means device does not work under GPRS mode.
• *Specified date Load: send SMS: “load+ password+ space+ year month date” to tracker device, it will reply: “load ok” and load the tracking data to the web platform upon the valid time you choose. For Example: send SMS: “load123456 20110425” to the tracker device, means to load the tracking data of 25th April 2011 to web platform.

10. Forward the third parties’ message:

• For example, set the phone number of the service provider of the SIM card in the tracker, when charge remind message coming in, tracker will forward it to authorized phone number. Only 1 third parties phone number can be set up at most.

11. SIM card Balance Inquiry:

• How it works: take China Mobile as example, After accept balance command, tracker will remember the “mobile phone number”, carrier’s phone number and the code, then send the code to carrier’s phone number, and forward the message from carrier to mobile phone number.

12. ACC working alarm:

• Tracker will send "ACC on+latitude & longitude" to authorized numbers when detect ignition on, that means the vehicle has been started; and tracker will send “ACC off+latitude & longitude" to authorized numbers when ignition off and ACC is off, that means vehicles has been stopped.

13. Arm/lock:

• Send SMS command “arm+password” to the tracker, the terminal of vehicles will change to arm state, Meanwhile, car door is locked, and it will reply SMS “Tracker is activated”. If the vehicle are in ignition state (ACC is ON), car door will be locked, but ARM will fail, Meanwhile, it will reply SMS “set up fail! pls turn off ACC”. If engine is off, but door is open, then the car can’t enter ARM state and reply “setup fail, pls close the door.”

14. Disarm/Unlock:

• Send SMS command "disarm+password" to the tracker device in the vehicle, It will reply “Tracker is deactivated” in both armed and disarmed state, and the SMS command will make the tracker device enter into disarmed state if the unit currently armed. It won’t alarm if the door is open and sensor is vibrated and the engine is started when deactivated this arm function.

15. Silent arm:

• Send SMS “silent+password” to tracker, it will reply “silent ok!”. It means tracker enters into silent mode and door will be locked as well; siren won’t be sound after alarm is triggered, but tracker will send SMS to authorized numbers.

16. Decide how many times of alarm message:

• You can decide how many times of the alarm message to be sent, For those alarm message sent in cycle, you can limit the times the alarm message to be sent. For example, send SMS “ xtime+password+005 “ to tracker, alarm message will be sent 5 times once alarms are triggered.

17. Multiple Alarms:

• * SOS Emergency Alarm: long-press SOS button on the cables for 3 seconds, the device will send sms: “help me + lat/long” to every authorized number at interval of 3 minutes. No beeps from siren. Alerts will be stopped after received “help me” from any authorized phone number.
• * Low battery alarm: the tracker will send SMS “low battery+latitude/longitude” to authorized numbers 2 times in total at 15 minutes interval when voltage of battery is going to be about 3.55V.
• * Power off alarm: it will send SMS “power alarm+latitude/longtitude” to authorized numbers every 3 minutes when external power is cut off.
• * GPS Blind Spot Alert: it will send alert SMS “no gps+last valid latitude/longitude before lost GPS signal”.
• * Geo-fence: set up a geo-fence for the tracker device to restrict its movements within a district. The unit will send SMS to the authorized numbers when it goes out of this district
• * Multi-area management: 5 areas can be set up at most. The distance between two points can't be less than the total distance in the 2 commands, and different areas can't cover each other
• * Movement Alarm: with GPS signal reception, after the unit stayed immobile in a place for 3-10 minutes, user can set the movement alarm, for example, send SMS “move+password+space+0200” to the tracker (Suppose area of a radius of 200 meters, it supports 4 digits at most. Unit: Meter). It will reply “move OK”. In case of such a movement (the default distance is 200m), it will send SMS “Move+ latitude & longitude” to the authorized numbers.
• * Overspeed Alarm: for example, if you want to set the alarm speed as 80km/h, then when the target moves exceeding 80km/h, the unit will send SMS “speed+080!+ latitude & longitude” to the authorized numbers. it will send only one SMS in 3 minutes in SMS mode when overspeed, the siren will beep 1 time when overspeed 1 time.

18. Sleep Mode:

• When vehicle is not driving (ACC is OFF), GSM module fall asleep; GPS module shut off; and tracker works in low power consumption. Calling, SMS command and any triggered alarm can wake up it.

19. Check the Vehicle State:

• Send SMS command “check+password” to the tracker in the vehicle, It will reply SMS including:external power、battery、GPS signal、ACC、Door、GSM signal、GPRS status、APN、UP、IP、PORT etc.

20. Terminal (local) Time Setting:

• For example: Send SMS “time zone123456 8”, 8 is Chinese time zone, If your country time zone is minus, send SMS “time zone123456 -8”.

21. Reset Hardware:

• Send SMS “reset+password” to tracker device to reset the GSM module and GPS module of the tracker device, it will reply “reset ok”.