Kegco K309B-1 Kegerator Black, 2 Faucet

Digital Temperature Control

It has never been easier to set and monitor your keg cooler's internal temperature than with our push button controls and digital temperature display. Instead of relying on an imprecise manual dial to adjust the temperature, these units utilize up and down buttons to alter the temperature in 1 degree increments. The clear LED display can be set to show the temperature in either Fahrenheit or Celsius.

Fan-Forced Cooling

Kegco K309 kegerators feature fan-forced cooling that provides even cooling throughout the unit and gives you one of the coldest temperature ranges of any beer refrigerator on the market - as low as 32 degrees!

Large Interior

This beer keg refrigerator has a spacious interior that can easily accommodate any full size keg (including Coors kegs, Miller kegs, and rubber kegs!), as well as up to two 5 gallon D system kegs or up to three 5 gallon Cornelius ball lock home brew kegs.

Deep Chill Function

If you ever find yourself needing to quickly cool down a warm beer keg, the Deep Chill function will be perfect for you! Press the convenient Deep Chill button, and the compressor will work continuously for up to 24 hours to get your keg to the desired temperature. Simply press the button again and the unit will return to its normal operation.

Kegco 3" Diameter Polished Stainless Steel Dual Faucet Draft Tower with Chrome Faucets

This tower is a commercial grade single column, dual faucet, 3" diameter stainless steel draft tower. It comes complete with two chrome plated faucets with brass levers and two 5 foot lengths of 3/16" I.D. clear beer tubing that end in a nozzle and hex nut assembly that connects to all standard keg couplers. The tower is mounted using a gasket and four screws that are included.

Two Kegco KT85D-L 'D' System Lever Handle Keg Couplers

These easy-to-use Kegco KT85D-L Lever Handle Keg Couplers work with all domestic brand American 'D' system Sankey kegs. They feature 55-psi pressure relief valves, nickel-plated forged brass bodies, and sanitary stainless steel probes. To tap a keg, simply pull out and then down on the lever handle.

Kegco 762-2 Commercial Grade Dual Gauge Two Product Regulator

Kegco's 762-2 Double Gauge Two Product Commercial Grade Regulator ensures peak performance in demanding commercial environments. It features a T-style adjustment valve that makes it easier than ever to adjust the keg pressure when the regulator is cold. This two product regulator features a Y-splitter for applications where two kegs will be dispensed at the same keg pressure, and has two independent shut-off valves. A gauge on the top indicates how much CO2 pressure is inside of the keg while a gauge on the side indicates the volume of CO2 gas remaining in the tank.

Kegco B5-RED Empty 5 lb. Aluminum CO2 Tank with Electric Red Epoxy Finish

This tank is produced from high strength aluminum alloy 6061-T6, a highly corrosion-resistant material. It features an eye-catching powder coated epoxy finish in Electric Red that acts as an extra layer of protection against corrosion and wear. The service pressure is up to 3000 PSI/207 BAR. These cylinders are stamped with the required U.S. Department of Transportation and Transport Canada markings. The 320 valves are CGA approved and have a male thread for CO2 regulators. An average fill is good for 5-6 kegs.