SSK M.2 NVME SATA SSD Enclosure Adapter, USB 3.2 Gen 2 (10 Gbps) to NVME PCI-E SATA M-Key/(B+M) Key Solid State Drive External Enclosure Aluminum Support UASP Trim for SSDs 2242/2260/2280

Main Features

Fashion Design for Excellent Heat Dissipation

Adopts aluminum alloy shell, Slim design, and excellent heat dissipation, be portable and easy to carry.

Attention:

Due to the nvme SSD extreme transmission speed, the temperature is higher than USB3.0 HDD, we tested ours is around 50 °C in writing and below 40 °C in reading, even after a long time R/W, the speed will not drop down or device will not shut down.

Extreme Data Transfer

With USB 3.1 Gen2 interface,provides transfer speeds of up to 1000MB/s,1GB file1 second. Backward compatible with USB 3.1/3.2 Gen2 and USB 3.1 up to 10Gbps.

Notice :

Insert your NVMe or SATA SSD into the enclosure and connect to your laptop’s USB-C or Thunderbolt 3 port to transfer movies, music.

The actual speed depends on the speed of your SSD, USB Port type, your computer performance etc, nvme ssd is not included.

SSD needs to be fully inserted for working

If there is a fatal errors or SSD can not be recognized: First, Please confirm your SSD is M.2 PCIE NVME SSD. Second, please confirm whether your SSD is fully inserted into theNVME Slot. If not, you need to push the SSD into the PCIE NVME Slot at a 45 degree angle.The pins of the SSD will be fully seated and covered.

Main Features

Easy Installation

With screw driver, no additional tools required. With two cables, USB A to C and USB C to C which suitable for all Host PC ports.

Supports Plug & Play and Hot-Swapping

Copper Strip + Thermal Conductive Pad for Excellent Heat Dissipation

SSK Enclosure not only adopts the larger copper strip for heat dissipation, but also have a special design, it adds a plastic shrapnel which can lift SSD slightly. With the thermal pad, the lifted SSD can be tightly attached to the Aluminium shell, so as to achieve the purpose of rapid heat dissipation.

Multi OS Compatible

• Windows 7 or above, Mac OS 10.10.5 or above, Linux, and Type C Android Phones.
• Blue Indicator is always on when plug in, and flash when read or write data.