SSK NVMe SSD Cloner, M.2 Duplicator Dual Bay NVMe Enclosure, Tool-Free 20Gbps USB3.2 Gen 2X2 SSD to USB Adapter M.2 Docking Station for M Key PCIE NVMeSSD Reader Supports Offline Clone
Versatile Dual NVMe Enclosure: This dual bay NVMe enclosure supports both M Key and B+M Key NVMe SSDs. Powerful JMS586U chip operates two SSDs simultaneously for multitasking without performance drop. Note: M.2 dock supports NVMe SSD ONLY, does not support SATA and other non-NVMe SSDs
Ultra-Fast M.2 Reader: Equipped with a USB 3.2 Gen 2x2 interface, this NVMe duplicator offers blazing speeds up to 20Gbps, making this SSD dock an ideal SSD to USB adapter for those needing speed
One-Click SSD Cloner: SSK NVMe dock doubles as a standalone nvme cloner, allowing you to clone drives with just a single button press. No need computer—this M.2 duplicator handlesall. Note: Please ensure both drives are NVMe protocol to use the cloning feature. SATA not supported. Target drive will be erased and cloned to match the source drive exactly
Optimized Speed and Stability: With USAP protocol support, this dual NVMe enclosure ensures faster data transfer, making it a reliable ssd to usb adapter for professionals
Secure Data with Smart Technology: Safeguard your data with built-in S.M.A.R.T monitoring your SSD's health, and TRIM optimizing performance and maintaining drive efficiency. This ensures your NVMe duplicator remains reliable and effective over time
Enhanced Cooling and Easy Installation: The open design of this M.2 dock allows for easy SSD installation and effective heat dissipation. Note: High-performance SSDs may heat up during operation. It's advised to allow the SSDs to cool down before handling them after heavy use
Seamless Connectivity: This dual NVMe enclosure comes with a 20Gbps USB-C and a 10Gbps USB-A cable, plus a 12V/2A power adapter, making it a fully equipped NVMe to usb adapter. Just format your new SSDs, and you're ready to go with this NVMe dock
Clone Function Note:The target drive capacity has to be at least equal or larger than the source drive. Only NVMe drives are supported for cloning; SATA or other protocols are not supported. Please be carefully to press the Clone button since this will delete all data in the target drive and make sure the data cable is unplugged form the dock before cloning
Product Specifications
Customer Reviews: 4.2 out of 5 stars 292Reviews
Best Sellers Rank: #14 in Enclosures
Product Information
Product description
Please check SSD type, this M.2 dock reads NVME SSD only. SATA and other SSDs will not work in both PC and Clone mode.
How to use Offline Cloning
Note: Target must ≥ Source, Both SSDs should be NVMe! Target will be cloned exactly the same as the source in partition, format and data.
How to Read & Write
Attention: NVMe SSD will generate a lot of heat during use. Therefore, do not touch the SSD when using this product. After use, wait for the SSD to cool down before touching and removing it.
Data Security Note:
Please check SSD type, this M.2 dock reads NVME SSD only. SATA and other SSDs will not work in both PC and Clone mode.
The target drive has to be at least equal or larger than the source drive in capacity to use offline drive-to-drive cloning.
The cloning process will eliminate your target drive's all existing data.
To keep the existing data on the target drive and the source drive, switch the dock to PC mode and connect the dock to PC to transfer data through computer manually.
Please do not directly unplug the drives when cloning. Only when the cloning process is complete, can you eject your drives.
When your hard drive is transferring data with the computer, PLEASE do not directly unplug the hard disk when the data transfer is in process. Eject the drive from the computer ONLY when transmission completed.