Suptopone Electric Scooter Charger 4 Prong for Ninebot S/S-MAX/Mini PRO/Mini lite, 63V 2A 4-Pin Connector Battery Charger Replacement Accessories with Ninebot by Segway Go Kart

Before ordering, please make sure that the connector of the old charger is the same as ours.

Don't use for batteries with safety problems.

Don’t use if your battery connector or polarity don't fit.

Don’t use when the environment is wet.

Isn't E-mobility device accessory. Don’t use. as E-mobility charger.

Cut-off the AC when the battery is full charged.

Don’t charge when the battery is broken.

There may be the following reasons for the charger not working after connecting to the power supply:

1. The voltage and current of the charger do not match your battery. You have purchased a charger with wrong parameters. Please tell us the brand and model of your electric bike or the parameters and plug of the original charger.

2. Due to the limited life of the lithium battery, the charger will not work if the battery is damaged. Your battery may be damaged if it is not used for more than 12 months or 2-3 months.

3. If the green light comes on when the power is turned on, but the LED light does not turn red after the battery is connected, the connector should be loose and in poor contact, and the plug can be re inserted to maintain good contact

4. If there is a green light when plugged into the power supply, and the light goes out after connecting the electric bicycle, it is because of the internal short circuit of the electric bicycle, which causes the charger to have a self-protection function. You'd better check your e-bike battery and replace it