SWANSOFT Timegrapher No.1000, Multifunctional Watch Tester, Watch Timing Machine for Watchmaker, Watch Calibration Tool for Mechanical Watches

Measuring possibilities: Rate deviation, amplitude, beat error:

Rate deviation measurement: the range of deviation is± 999 sec / day, precision 1.0 sec/day.

Amplitude measurement: Numerical display in degrees, resolution is1°, measuring range:100° to 360° (the lift angle can affect the amplitude, range: 30°to 70°.Under normal circumstances, the amplitude value do not exceed 330°.)

Measuring position: 1 to 6 positions

Supply voltage: single-phase AC 100 V～240V ± 10% two-line

Working environment: 0 ℃ to 50 ℃, relative humidity: 0 to 80% RH

Tips of SWANSOFT timegrapher No.1000:

⫸Scope of application:

-Only for mechanical movement watches, quartz movement watches are not supported.

⫸ Model limitation:

-Basic model is suitable for ordinary mechanical watches. For high-end watches (e.g. Omega Co-Axial 2500/8500), it is necessary to input movement information manually, so it is recommended to choose advanced models for testing.

⫸ Oscillation Requirements:

-Make sure the watch swing angle is 220° ~ 320°.

⫸Environmental Requirements:

-Stay away from high radiation or noise sources such as cell phones, chargers, TVs, stereos, computers, LED lights, ultrasonic cleaners, electromagnetic ovens, microwave ovens, etc. during the test to avoid interfering with the pickup signals.

Package Content