[Upgraded] 1Mii B06Pro Long Range Bluetooth Receiver, HiFi Wireless Audio Adapter, Bluetooth 5.1 Receiver with 3D Surround aptX HD Low Latency Optical RCA AUX 3.5mm Coaxial for Home Stereo System

1Mii B06 Pro Wireless Bluetooth 5.1 Receiver (Upgraded Version)

The upgraded version (Bluetooth 5.1) home stereo Bluetooth receiver helps you get rid of wires and enjoy high quality wireless music freely.

Why Choose Us?

-197FT Long Range for Bluetooth Music Streaming: With dual antennas, 1Mii B06 Pro long range Bluetooth receiver can achieve a range of up to 197ft (60m) line-of-sight in the open air and up to 50-70ft (20-30m) indoors(without obstacles).

NOTE: the operation range can be affected by Wi-Fi routers or antennas on the stereo receiver, etc.

-Coaxial&OPT & AUX In: Apart from 3.5mm and RCA AUX cables, this new version Bluetooth receiver is added an optical port and coaxial port so you can also use an optical or coaxial cable for connection.

-Volume Buttons: You can press the volume button on the 1Mii B06Pro long range Bluetooth receiver to adjust the volume. Also, you can press the volume +/- button for 2 seconds to do next or previous track.

-aptXLow Latency & aptX HD: The 1Mii Bluetooth audio receiver uses the most innovative Bluetooth technology. It implements Qualcomm Bluetooth 5.1 protocol and the aptX Low Latency and aptX HD technologies that delivers the superior sound quality.

-Hi-Fi & 3D Surround Sound: With the 3D audio button, you can switch to 3D mode to enjoy the surround sound with High Fidelity from a normal audio source. Its advanced internal chip takes charge of the conversion to make it possible, using convenient lossless codes.

Quick Guide to Connect with Alexa Devices:

1. Connect this B06Pro to your speaker or stereo via a 3.5mm jack or RCA cable. Please make sure to use the audio cable to connect the Bluetooth receiver with your speaker, not with the echo.

2. Press the round button to enter the pairing mode(red and blue light flashes alternately).

3. Enter the Alexa on line app, Settings-->Devices/Echo-->Bluetooth-->Pair a New Device-->B06Pro

And please note this: Go to settings, then "device settings", select your echo, then “Bluetooth devices" and then pair to the B06Pro Bluetooth receiver. Do not try to connect via the "add a device". On the Device page, select your echo and pair it via Bluetooth when the next menu comes up.

NOTE: Please use 5V power supply! DO NOT use unmatched power sources (e.g., 9V /12V), which may lead to equipment failure!