W10780048 Washer Suspension Rod kit -Compatible with Whirl.pool May.tag Ken.more Washing Machine - Replace W10257087 W10257088 W10349193 WTW4800XQ2 WTW4800XQ4 WTW6600SW1 by TOMOON

• w10780048 suspension rod kit kit includes
• 4 Suspension rods;
• 4 Bushings;
• 4 Suspension balls;
• Instructions.

Tools:

Screwdriver, tape, towel, length of small chain and a rubber glove was handy to hold on to the rod while compressing the spring to hook at the top.

Repair & Advice

Two people were needed for the job. you can lift the whole top lid and while the other man hold the lid you lift one of the springs by the hook with pliers and take out the two circle plastic pieces and drop the spring and take it out. Then tilted the whole washer back and replaced the new spring from underneath.Then you can place the washer down and put the first white round piece. Use pliers to lift the hook to get the round tan piece in place under the hook and turn in into place. It help to put the screw driver in the hook loop to lift the spring and place it in the tan round plastic piece. you can do one spring

Fix the Problem:

Washer was not balanced during spin cycle even with small loads.

Loud banging noise on the spin. Springs were worn out.