XTOOL X100 MAX アドバンスドキープログラミングツール KC501+ EEPROMアダプター + アダプターキット付き 読み取りピン トポロジーマッピング ECUコーディング 双方向制御 35以上のサービス 2年更新 CANFD

XTOOL X100 MAX 2 IN 1 KEY PROGRAMMING TOOL & DIAGNOSTIC Tool with KC501 & EEPROM Adapter

Perfect choice for Technician, mechanics, workshops, locksmith, Advance DIY, Garage, Car dealer, Auto repair shop, etc.

•Comprehensive IMMO/Key Programming Functions: X100 MAX combines the most advanced key programming and immobilizer capabilities with OE-level diagnostics, equipped with KC501 key programmer, performs key fobs programming, read PIN, read & write car keys & key chip, ideal for auto technicians and locksmiths!

• Additional Feature: Works with KS-1 Key Programmer (B09SNWWVX3)for Toyota/for Lexus models with smart keys All keys losst situation

• "Dealer-Level" Full Systems Diagnostics: X100 MAX has the abilities as OEM tools to perform all available systems diagnostic to view all the situation of each system tp read/clear codes, live data PIDs graphing for all vehicle systems including Engine, Transmission, Chassis and Safety control system, Body control system, Communication and Entertainment system, etc.

• 42+ Maintenance Services & Full Special Functions: Oil Reset, EPB, BMS, SAS, D*P*F, Throttle Relearn, ABS Bleed, Key Programming, injector Coding, Air Suspension, Transmission Relearn, TPMS Reset, Airbag Repair, Hybrid Control Compression Test, HVAC Control Module Calibrate, Zero Point Calibration, Injector Balance Test, Fuel Trim Reset, Cylinder Power Balance, Crankshaft Sensors Relearn, rewrite the vin on pcm, alcohol composition reset, suspension calibration, etc.

• Bi-Directional Control:Full control over all various vehicles components to perform active tests like EVAP test, idle relearn, injector test, cycling ABS motor pump, A/C Clutch Switch On/Off, Windows Turn On/Off, Fuel Trim Reset, Fuel Composition Reset, etc.

•Refresh Hidden Functions: XTOOL X100 MAX performs flash the hidden features, Personalized Settings, or disable the annoying functions, such as turn off the back up beep, turn the seat belt buzzer off. And reprogram the adaptive data for certain components after repairs or replacements.

• Guide Functions: With VAG Guide Functions, X100 MAX scan tool can perform complex functions such as special functions, ECU coding, etc., to help your diagnostic step by step with instructions for VW, for Audi, for Skoda, etc.

• ECU Programming: Provide best solutions for BMW/for Benz/for VW/for Audi/for SKODA/for Ford/for Mazda/for Lincoln for ECU programming, to replace the existing software/firmware in the electronic control unit, program new ECUs, and fix software-controlled driving performance and emission issues.

• Top Hardward Configuration: ✔️Android 10 systems ✔️9.7'' Touch Screen ✔️12800mAh(6400mAh*7.4V) Battery ✔️1024*768 Resolution ✔️Quad-Core 1.8GHz CPU Processor ✔️4G RAM & 128G ✔️ Dual WiFi

• Support CAN FD/DoIP Protocols: access new communication protocols of CANFD (cover for GM MY2020+ models) without extra adapter, of DoIP (cover for BMW E/F/G Chassis, for Land Rover, for Jaguar).

• W!F! Connection & Wired Connection via Type C to Type B cable: W!F! Connection makes it easy to move from the dash to the front of the car. With the USB cable along with VCI, the user has convenience along with certainty that the system will work one way or another.

• 10,000+ Vehicle Coverage: Covers 10000+ Vehicles includes ✔️American ✔️ European ✔️Asian ✔️Japanese brands makes, etc.

• 2 Years Software Udpate & Support 14+ Languages & Remote Support

• AutoScan & AutoVIN: AutoVIN functions allowing you to quickly figure out Vehicle Identification No. (VIN) to perform fast diagnostic.

X100 MAX ALL IN ONE PROFESSIONAL KEY PROGRAMMING TOOL WITH KC501 KEY PROGRAMMER

With Complete IMMO& key FOB Programming Abilities

✔ Check number of keys

✔ Read PIN code/PIN code calculation

✔ Add keys

✔ Generate dealer key

✔ Program new key Fobs

✔ Remote learning

✔ All keys losst

✔ Read & write car keys & key chip

✔ Generate dealer keys

✔ Read remote frequency, chip type & chip ID

✔ Read & write MCU/EEPROM chip

✔ …

Note: IMMO & Key Programming Functions varies across Vehicles.

As for Benz infrared key , FBS4 type cannot be supported.

OE-LEVEL FULL SYSTEMS DIAGNOSTICS & BI-DIRECTIONAL CONTROL

>>>"Dealership" level to feature the same diagnostic capabilities as OE tools:

✔ X100 MAX car diagnostic tool performs OE-Level diagnosis on all available systems like ABS, SRS, TPMS, Engine, Transmission, Brake System and etc, with complete capabilities for codes, live data, active test, ECU information, which makes It an ideal choice for DIY auto Mechanic and repair shop.

✔ Display live data stream in text or graph like misfire data, transmission fluid/Oil temperature, cylinder balance rates, engine rpm, mass air flow sensor data, fuel pressure, actual fuel temperature vs desired fuel temperature and etc;

>>>Bi-Directional Control(Active Test):X100 MAX bidirectional scanner supports active test to output the command into the ECU to request information or command a module to perform specific tests and functions. To find faults in the subsystems of your car effortlessly, without using the vehicle’s control.

✔ Mose-Used Active Tests:

>E*VAP Test

>Injector Buzz Test

>Window/Mirror/Door Lock Test

>A/C Clutch On/Off

>ABS Pump Cycling

>Pump and Value Tests

>Interior & exterior lights Test

>Sound horn Test

>...

XTOOL X100 MAX 2024 Newest Auto Diagnosic Bi-Directional Tool, Upgraded Version of X100 PAD3/IK618

✔ Oil Reset: Reset service intervals after oil change and turn off the oil light.

✔ EPB Reset: Reset brake pads after replacement of brake system.

✔ SAS Adjustment: Perform calibration of the steering angle sensor

✔ BMS Reset: Register the new battery to the ECU after replacement.

✔ Throttle Relearn: Enables you to make initial settings to throttle to adjust the amount of air intake.

✔ ABS Bleeding: Perform ABS Brake Bleed function to cycle the ABS pump to bleed the air out of the ABS.

✔ Injector Coding: Coding injectors after replacement.

✔ Transmission Match: Reset the adaptive shifting points in your automatic Transmission Control Unit.

✔ Gear Learning: Crankshaft position sensor learns crankshaft tooth machining tolerance and saves to the tablet to diagnose engine misfires more accurately.

✔ Key Programming/IMMO: Disable the lo~st vehicle keys and program a new replacement key fob.

✔ Full Special functions:Steering position sensor calibration, Zero Point Calibration, Hybrid Control Compression Test, HVAC Control Module Calibrate, Injector balance test, ECU Configuration, VGT Turbo Calibration, Idle Learn Reset, Alcohol Content Reset, ABS Initialization, Seat Weight Sensor Calibration, Fuel Trim Reset, Cylinder Power Balance, Crankshaft Sensors Relearn, Language change, A/F Settings, Stop/Start Reset, etc.

Note: ALL the service functions available vary acorss vehicles. Please come to us to check compatibility with car VINs.

ALL IN ONE SOLUTION FOR ALL YOUR NEEDS

• Activate Hidden Functions: help refresh hidden functions to reprogram adaptive data for certain components after making repairs or replacements. You can activate the higher-level car functions and disable any annoying features. Modify personalization/customize some extra options such as disabled the seat belt buzzer, wind the windows down with the remote fob, etc.

✔ Compatibility list: for BMW/for VW/for AUDI/for SKODA/for TOYOTA/for LEXUS/for SCION/for MAZDA/for FORD/for LINCOLN

• Advanced ECU Coding:performs ECU Coding, Component Matching, Adaptive Data Reset, Flash Hidden Functions, etc to optimize vehicle performance and customize car settings.

✔ Compatibility list: for VW/for AUDI/for SKODA/for BENZ/for Mitsubishi/BMW

• ECU Programming & PMI(Programmable Module Installation): Provide best solutions for ECU programming, to reflash modules like ECM, TCM, BCM in the electronic control unit, program new ECUs, and fix software-controlled driving performance and emission issues.

✔ Compatibility list: for BMW/for Benz/for VW/for Audi/for SKODA/for Ford/for Mazda/for Lincoln

• Topplogy Mapping: helps faster full system diagnostic to view the communication structure between modules clearly with all the situation of each systems including Engine, Transmission, Chassis and Safety control system, Body control system, Communication and Entertainment system, etc.
• V.A.G Guided Functions:With V.A.G Guide Functions, X100MAX can perform complex functions such as special functions to help your diagnostic step by step with instructions for VW, for Audi, for Skoda, etc.
• Anti-theft IMMO Service: X100 MAX with professional Key Programming Capabilities include Read PIN, Add New Key Fob/Smart Keys, Remote Learning, Key Matching, lo~st keys, read & write MCU/EEPROM chip, etc.

✔ Compatibility list: vary across vehicles, please check via xtool direct @ out look . c o m

Additional Features to Make It Better for Diagnostics

• Online Support:For online support or remote assistance please reach out to us via email directly.
• AutoVIN & AutoScan: AutoVIN functions allowing you to quickly figure out Vehicle Identification No. (VIN) to perform fast diagnostic.
• W!F! connection & Wired connection:XTOOL X100 MAX offers upgraded Wireless W!F! Connection, which provides ✔ 20X faster speed: 64 Mbps(Max) transmission speed,✔ further distance: range up to 10-20 meters(33-66 ft) diagnosis distance, range up to 30meters(100ft) and further without other W!F! disturbance in an open environment, ✔faster and more stable communication: access diagnostics within 5-10 seconds.

Note: There is no need additional WI~FI network to connect the scanner and your car or the VCI, since it has its built-in WI*FI, it can connect the scanner and the VCI and also the car automatically after you connect the VCI and your car.

Note: Downloading the software still requires an internet connection.

• Upgraded and More Durable Battery: It upgrades the original 3.7V*10000mAh to 7.4V*6400mAh, which equals to 3.7V*12800mAh(Add 2800mAh). ✔The new battery can lasts double hours than the old one.
• Support CAN FD/DoIP Protocol: access new communication protocols of CANFD (cover for GM MY2020+ models) without extra adapter, and wilress communiccation of DoIP (cover for BMW E/F/G Chassis, for Land Rover, for Jaguar).
• Diagnostic Report Sharing & Printing:X100 MAX auto diagnostic scan tool enables diagnostic tech or mechanics to generate diagnostic reports before and after car diagnostics and maintenance services by printing it out or sending it to customers via PDF.

Covers 98% Vehicles in the market, 100+ Makes, 150+ Brands, and 10,000+ Models.

x100 MAX Key Programmer equipped with Android system, Quad-Core 1.8GHz CPU Processor, 4GB RAM & 128GB ROM, which greatly increased the speed of running multiple task. With upgraded rechargeable battery lasts up to 10 hours of continuous use, 2.4GHz&5GHz Dual-Frequency Wi-Fi, 20X faster transmission rate, 8MP Camera and built-In Speaker, Microphone, supports external sound playback. X100 Max is a comprehensive immobilizer and key programming tool and ideal for auto technicians, locksmiths, advance DIY, auto repair shop, garage, car dealer and home mechanic.

• Accessories List:

KC501, EEPROM Adapter, VCI Box, Power Charger (with US plug), EU Charger Plug, UK Charger Plug, USB Type-C Data Cable, USB Type-C to Type-B Cable, USB Type-C to USB 3.0 Adapter, Type-C to Type-A (F) Adapter Cable, Cigar Lighter Cable

• Adapter Kits:

XTA001 Cable, XTA002 Cable, XTA003 Cable, IC Test Stand, Connecting Bracket, EEPROM PCB, FQFP64 Board, FQFP80 Board, FQFP112 Board, FQFP144 Board, FQFP176 Board, IC Clip Cable, Color Cable, DuPont Cable, For Mercedes-Benz IR Key Collector

• Connector Adapters:

OBD II-16, DB15 Main Cable, for HONDA-3, for KIA-20, for MAZDA-17, for HYUNDAI/KIA-10, for NISSAN 16+32 CGW Adapter, for Chrysler 12+8 SGW Adapter

• Usage of Adapters:

✔for charging the device: use the Power Charger (with US plug) or the UK Charger Plug + USB Type-C Data Cable(Charger Cable) to get charged.

✔for KC501 or other accessories connection: use the USB Type-C to USB 3.0 Adapter to connect the scanner and KC501 or other accessories with the same connector.

✔for VCI connection: use the obd2 connector and DB15 cable to connect the VCI and the car.

✔for wired connection: use the USB Type-C to Type-B Cable to connect VCI and scanner after VCI is connected to the car.

✔for computer connection: use the Type-C to Type-A (F) Adapter Cable to connect the scanner to PC to transfer diagnostic reports.